Jump to content

Nat Type 3 Work Around


RogerNeylanVita

Recommended Posts

Hi all,

 

When trying for the 'Rush Hour' trophy it works better if NAT type is either set to 1 or to 2 - if you are getting NAT type 3 it is almost impossible to accept or give out invitations to fight.

 

After trying for a few hours to find a solution, I managed to get around the problem with this solution:

 

1. Go to settings

2. Select Network then Wi-Fi Settings

3. Make sure Wi-Fi is on and you choose your Access Point

4. After connecting select your access point to open a new window

5. Select Advanced Settings

6. Select IP Address Settings and select PPPoE

7. For Username enter the username you used to set up your router (usually the first part of your ISP e-mail before the @ sign - so in my case was Neylans)

8. Enter the router password for PPPoE password

9. DNS Settings should be Automatic

10. Proxy Server should read Do Not Use

11. MTU Settings should read as Automatic

12. Select OK

 

To check if it's worked go back and select Internet Connection Test and this will display whether the NAT type change has been successful.

 

Hope this helps!

Link to comment
Share on other sites

  • 3 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


×
×
  • Create New...